8
machine is damaged, repair it before use. Many accidents are caused by
poorly maintained machines.
Check:
- The machine and look for loose and damaged parts (screws, nuts and etc).
- Engine oil level.
- Damaged and /or defective welded parts.
Make sure that the machine undergoes adequate maintenance controls. All
damages caused by the use of defective, worn out or non original parts, annuls
the warranty responsibility of the manufacturer.
Keep your face and body as far away from the machine as possible. Whilst
introducing the wood into the machine for shredding, maintain both feet at the
same level as those of the wheels.
Turn off the machine, disconnect the spark plug and make sure that the cutting
tool has stopped before making any adjustments, filling with fuel, changing
accessories, cleaning, transportation and storage of this machine. Such
preventive safety measures reduce the risk of accidental starting of this
machine.
Never tilt the machine when the engine is running.
Replace the caution signs if damaged or if not legible.
Reduce the engine speed when shutting down the engine, and if the engine
has a petrol closing valve, then close this valve when the engine is not running.
2.7. SERVICE
Summary of Contents for JONCO Series
Page 2: ......
Page 38: ...35 Section C Ref No Part No Description Quantity 62 R08PL00062 Catcher 1...
Page 39: ...36...