14
unsatisfactory engine performance. If the fuel has been in the machine’s tank
for longer than two months, empty the tank and replace it with fresh fuel.
5.3. FILLING THE FUEL TANK
1. Choose a suitable area to perform this operation.
2. Remove the fuel tank cap and fill with fuel.
3. Tightly close the fuel tank cap and remove all any spilled fuel with a dry cloth.
WARNING: Stop the engine before refuelling.
Do not start the machine in an enclosed room or space. The exhaust gases
and fumes from the fuel and oil contain carbon monoxide and harmful
chemicals.
In case of a large amount of gases produced by poor ventilation, stop the
engine safely. Do not return to the working area unless you have properly
ventilated the area and are certain that ventilation is sufficient so that this does
not happen again.
Do not refuel in locations where there is the presence of open flames, sparks or
heat sources. Always fill the tank in well-ventilated areas and with the motor
stopped. Don’t overfill the fuel tank. In the event of a fuel leakage be sure to
remove these leaks completely before starting, move the machine away from
the area of spillage and avoid any source of ignition until all vapours are gone.
Keep yourself at least 3 meters from the refuelling area before starting the
machine.
Summary of Contents for JONCO Series
Page 2: ......
Page 38: ...35 Section C Ref No Part No Description Quantity 62 R08PL00062 Catcher 1...
Page 39: ...36...
