background image

3

EN

This appliance can be used by children from 8 years and above and 
people with reduced physical, sensory or mental capabilities or lack 
of experience and knowledge if they have been given supervision 
or instruction concerning the use of the appliance in a safe way and 
understand the hazards involved. Children under the age of 8 or 
people with reduced physical, sensory or mental capabilities or lack of 
experience 

must maintain a safe distance from the table, the control unit, and the 

buttons of the operational control.

The table may only be used for the purposes described in this manual. 
Unauthorized access must be avoided!

The table may not be loaded with more than 80 kg. The system may only be used 
continuously for a maximum of 2 minutes.  After, the table must “rest” for 18 minutes 
before it can be operated again.

2 people are required to complete assembly of the table. Special caution must 
be taken during the movement of heavy parts and in proximity to any pinch or 
shearing point.

The instructions must be followed during assembly of the table. The height-
adjustment function may only be used after complete and appropriate assembly of 
the table. The table must never be used as a lifting aid. 

Screw connections on the table must be secure and checked in regular intervals. 

The power cord represents a trip hazard. Ensure that the cable routing 
accomodates the table’s entire range of movement and is not obstructed. The 
cable must be kept away from heated surfaces. Ensure suitable cable routing for 
devices that are placed on the table itself.

The table and its components may not be enhanced, changed, or rebuilt in any 
way. Do not use parts that are not recommended by the manufacturer. Never open 
electronic components, housings or covers. This entails the risk of electric shock. 
Maintenance and repairs may only be performed by qualified technical personnel. 
Disconnect all cables from the power outlet before cleaning and maintenance 
procedures. 

Summary of Contents for Desk Light



















Reviews: