— 19 —
4 (0100)
Channels AB are connected to fuel tanks (0 and 1), and CD to water tanks (0 and 1).
Sensors are of resistive type (USA, 240..33 Ohm).
5 (0101)
Channels AB are connected to fuel tanks (0 and 1), and CD to water tanks (0 and 1).
Sensors are of resistive type (EUR, 10..180 Ohm).
6 (0110)
A – fuel tank (0), B – waste tank (0), CD – fresh water (0 and 1). Sensors are of
resistive type (USA, 240..33 Ohm).
7 (0111)
A – fuel tank (0), B – waste tank (0), CD – fresh water (0 and 1). Sensors are of
resistive type (EUR, 10..180 Ohm).
8 (1000)
A – MDI unit (fuel tank 0), B – waste tank (0), CD – fresh water (0 and 1). Sensors are
of resistive type (USA, 240..33 Ohm).
9 (1001)
A – MDI unit (fuel tank 0), B – waste tank (0), CD – fresh water (0 and 1). Sensors are
of resistive type (EUR, 10..180 Ohm).
10 (1010)
AB – MDI units (fuel tanks 0 and 1), CD – fresh water (0 and 1). Sensors are of
resistive type (USA, 240..33 Ohm).
11 (1011)
AB – MDI units (fuel tanks 0 and 1), CD – fresh water (0 and 1). Sensors are of
resistive type (EUR, 10..180 Ohm).
12 (1100)
Reserved for future use.
In the 1.00 firmware is identical to preset 1 but with
tank numbers 4-7.
13 (1101)
Reserved for future use.
In the 1.00 firmware is identical to preset 2 but with
tank numbers 4-7.
14 (1110)
Reserved for future use.
In the 1.00 firmware is identical to preset 3 but with
tank numbers 4-7.
15 (1111)
User defined.
Settings was configured or altered with installation description
strings (see Section VI).
Table 1 continued
Summary of Contents for YDTA-04N
