9
a. Press “Menu”
b. Go to “Pair Camera” and select “Camera 2”
c. Press “Parking Aid line” to confirm
d. The unit is now in pair mode - if the monitor is able to connect with the Camera, the
display will show “Pair OK”.
If no camera is found, then the display will show “Pair Fail”. If you receive a “Pair Fail” message,
please call our technical support to assist in troubleshooting.
SEt DEFAuLt CAMERA
• The Backup Camera that is included in this System is set as the Default Camera (Camera 1).
When installed as directed by powering through the rear taillights, the rearview image will
automatically appear on the screen during reverse and will remain in standby when the vehicle
is in any other gear or driving forward. If the Camera is powered from another 12V source it will
be constantly powered instead of only when in reverse gear.
• In addition to the Backup Camera, this System can pair with ONE Yada Add-On Camera. The
Yada Add-On Camera would be designated Camera 2 when paired to the system.
Summary of Contents for BT54358-2
Page 1: ......