background image

11

opposite than when viewed in the rear view and outside mirrors.  Use the inside mirror or glance 
over your shoulder to properly judge distances to other objects.

•  The Backup Camera “night vision” feature is an aid to a driver but is limited.  Always use your 

own eyes to confirm the vehicle’s surroundings, as the displayed image may be faint or dark, 
distorted, or not entirely visible.  Always check behind and all around the vehicle visually with 
mirrors before proceeding. 

•  The area displayed by the Backup Camera is limited.  The Backup Camera does not display 

objects that are close to or below the bumper, underneath the vehicle, or objects out of 
the Camera’s field of view.  The area displayed on the screen may vary according to vehicle 
orientation or road conditions.

•  Be sure to check the Camera’s position and mounting angle before each use.
•  Make sure the trunk, hatch, or backdoor is completely and securely closed when backing up.
•  If the back of the vehicle is hit, the position and mounting angle of the Backup Camera 

Expandable System may change.

•  When washing the vehicle with high pressure water, be sure not to spray it around the Camera. 

Otherwise, water may enter the Camera unit causing water condensation on the lens, a 
malfunction, fire or an electric shock.

•  Do not strike the Camera.  It is a precision instrument.  Otherwise, it may malfunction or cause 

damage resulting in a fire or an electric shock.

•  This product will only provide images of items that are within the field of view of the Camera. 

Thus, it is imperative that the Camera should be kept clean and unobstructed, and should be 
mounted so that its field of view includes the entire area behind your vehicle.

•  Adhere to all applicable traffic laws and motor vehicle regulations applicable to the device.
•  Consult local laws and regulations for any restrictions on installation or use.
•  Never allow children to play with the device.  Small parts may be a choking hazard. 
•  If you replace the tires, the area displayed on the monitor may change and you may need to 

adjust the Camera.

•  There is a plastic cover over the Camera.  Do not scratch the cover when cleaning dirt or snow 

from the cover.

•  The Camera has a water resistant construction.  Do not detach, disassemble or modify it.  This 

may cause incorrect operation.  Camera is waterproof.

Summary of Contents for BT54358-2























Reviews: