11
Recording While Parked
Parking Surveillance
Mode:
Event Recording
Manual Recording
When the ignition is turned off (ACC power is blocked), the
system will convert to Parking Surveillance mode after 15
seconds. When the ignition is turned back on (ACC power is
connected), the system will convert to Normal Recording mode.
When an event is detected during Parking Surveillance
mode, recording will start. (15 seconds before / 15 seconds
after, total 30 seconds) Recorded files are saved within the
event folder within the memory card.
When movement is detected within the product line of
site during Parking Surveillance mode, recording will start.
(15 seconds before / 15 seconds after, total 30 seconds)
Recorded files are saved within the motion folder within
the memory card..
NOTE:
•
Constant power must be used during parking recording. Please seek assistance from your installation specialist.
•
Only event and motion detection videos are recorded when parked.
•
Do not cut the constant power cable. Cutting or damaging the cable may result in product malfunction.
