Yada Dash Road Cam HD, User Manual

8

a.  The Dash Road Cam HD has several different functions available for your use.  To access the shooting modes, 
 

scroll using the Menu Up or Menu Down buttons on the camera.

LOOP RECORD

• This is the default recording setting for the camera.

•  Press 

 to start preview and the Dash Road HD Cam 

   should automatically recording.

•  A red dot “REC” on the screen flashing indicates recording.

•  Files are looped or recorded over by the default of 10 minutes.  The Micro SD

    Card will hold 10 minute segments and record over them as space is needed.

•  Files saved under suffix “LOOP”

•  Stop Loop Video:  Press the 

 button while videoing to pause recording.

•  Digital Zoom:  When videoing use the 

  buttons as digital zoom 

   control. This camera has 16x digital zoom.

•  Adjust the EV Value:  When in video preview mode, press 

 key on 

   the camera, then 

  key to adjust and  

 to save.

•  Additional Settings:  Press 

 and use the 

 button to select 

   then press 

 .

Resolution Setting:   FULL HD1080P (1920 x 1080) 10fps,  HD 720P (1280 x 720) 30fps,  WVGA (720 x 480) 30fps, 
VGA (640 x 480) 30fps and QVGA 320 x 240 30fps.  The default setting is HD720P.  Using 

to set the resolution and then press the 

 to save the setting.  Press 

 to exit and 

 to record.

Loop Record Setting:  Select Off, 3 minutes, 5 minutes, 10 minutes or 15 minutes. Use the 

 key to save 

6. SETTINGS