Yadea C1S, User Manual

Installation of the battery(If applicable)

Ways to install battery:

1.Battery box cover  
2

.

Battery handle  

3.Power wire plug 

Power off

Power on

Lock hole

Seat lock/Anti-theft lock
Battery box lock

15

16

4.OPERATE INSTRUCTION

1.Rotate power lock to seat cushion open position, 

   open seat cushion and then turn off the air switch.

2.Rotate power lock to battery box cover open position 

   to open the battery box cover.

3.Put the battery into battery box, connect the power wire 

   plug well, and then close the cover.

4.Turn on air switch, put down the swat cushion.

Ways to take out the battery:

1.Rotate power lock to seat cushion open position, 

   open seat cushion and then turn off the air switch.

2.Rotate power lock to battery box cover open 

   position to open the battery box cover.

3.Pull off the power wire plug and take out the battery.

1

2 3

Power lock switch

1.Power on: Press the key at     /Lock position, the 
  speedometer will display     , then rotate the key clockwise 
  to position     in 20S.
2.Power off: 

①

Turn off to gear    , and press the key button, the vehicle 

   will anti-theft automatically after 3S. 

②

Turn off to gear    , take the remote control away from vehicle 

   over 2 meters, the vehicle will anti-theft automatically after 3S. 

③

Turn off to gear    , without leaving, the vehicle will 

   anti-theft automatically after 20S.
3.Seat lock and handlebar lock:
  Press the key button at     gear, the speedometer displays     , 
  rotate the key button counterclockwise to 

PUSH

 position 

  to open the seat cushion. Press the button and rotate 
  to 

LOCK

 position to lock the handlebar. 

4.Open battery box: First lock the handlebar, and then 
  rotate the key button at 

LOCK

 gear counterclockwise.