ATTENTION
●
Turn on the turning light before turning and turn off the
turning light in time after turning.
Single mileage clear
High beam/Low beam
Turning light
Horn
Lock
Lock/Unlock
Mechanical key
In unlock state, short press lock/unlock button,
the alarm enters anti-theft state.
Short press: time≤1.5S, Long press: time≥1.5S.
In lock state, long press lock/unlock button,
the alarm will play seek sound and light effect.
In unlock state, long press lock/unlock button,
the alarm system enters seat electric lock to
unlock seat cushion(if applicable).
In lock state, short press lock/unlock button,
the alarm enters unlock state.
Unlock
Seek
Seat
cushion lock
17
18
Left switch group
Anti-theft alarm(If applicable)
1.Single mileage clear: Long press “SET” button over 5S.
2.High beam and low beam switch: When the headlight
switch is turned on, short press the button to change
high beam and low beam.
3.Turning light switch: Push the switch button to the left
or right to turn on the turning light at the corresponding
position and send out a continuous flashing orange light
signal. At the same time, the speedometer sends out a
green turn indicator signal. After the switch is reset to
the middle position, press the switch to turn off the
turning light.
4.Horn button: Press the horn button to start the horn.
The key operation of the above remote control requires
the remote control to be within 30 meters of the scooter.
Summary of Contents for C1S
Page 1: ......
