background image

Battery Use and Maintenance

Attention
The new scooter battery maybe low due to delivery, transportation, etc. Please be sure to fully charge the

battery (the recommended charging time for the first time is 5 hours) before ridding.

If you do not use the electric scooter for a long time, please charging the battery regularly once a month, 
otherwise the battery life will be seriously shortened 

Don't throw away the waste batteries to avoid polluting the environment. 
The waste batteries shall be recycled by the distributor.

2. Use and maintenance of charger

 Carefully check whether the rated input voltage (AC220V) of the charger is consistent with the grid voltage.

 Pay attention to charging the battery in the open area.

 Check whether the charger output plug is loose or not. When charging, first connect the charger output plug to the 

battery pack charging interface, then connect the charger power plug to the household AC220V power supply, and the indicator 

light is red. This procedure is not allowed to reverse operation.

 When the "charging" indicator lamp is normally charged, the charging indicator lamp will show " red". When the indicator 

        lamp shows " green", it means that the battery is fully charged, and the battery can be put into use at this time.

 Chargers and wire covers are strictly prohibited from heavy pressure to avoid short circuit.  

        It is forbidden to put wet rain gear and charger into the bucket in rainy days.

 The charger adopts constant current and constant voltage intelligent charging method to charge. According to 

        the different discharge depth of the battery, the lithium battery can normally be fully charged within 5 hours. 

        After the battery is full, unplug the charger power plug first, then unplug the charger output plug.  

 When not charging or charging is completed, be sure to unplug the charger.

18

19

Summary of Contents for CUMI





















Reviews: