FT-250R O
PERATING
M
ANUAL
37
Set Mode
Set Item 31
[
SMT MOD
]
Function:
Select the Smart Search sweep mode.
Available Values:
SINGLE/CONT
Default:
SINGLE
SINGLE: The transceiver sweeps the current band once in each direction starting on the
current frequency. All channels where activity is present (up to 15 in each direc-
tion) are loaded into the Smart Search memories. Whether or not all 31 memo-
ries are filled, the search stops after one sweep in each direction.
CONT: The transceiver makes a sweep in each direction as with the “SINGLE” mode,
but if all 31 channels are not filled after the first sweep, the radio continues
sweeping until they are all filled.
Set Item 32
[
LK MODE
]
Function:
Select the Control Locking lockout combination.
Available Values:
KEY/DIAL/K+D(KEY+DIAL)/PTT/K+P(KEY+PTT)/
D+P(DIAL+PTT)/ALL
Default:
KEY
Set Item 33
[
NAR/WID
]
Function:
Select the Operating band width.
Available Values:
NARROW/WIDE
Default:
WIDE
Set Item 34
[
DTMF SP
]
Function:
Select the DTMF Autodialer sending speed.
Available Values:
50 ms/100 ms
Default:
50 ms (High speed)
Set Item 35
[
DT DLY
]
Function:
Select the DTMF Autodialer delay time.
Available Values:
450 ms/750 ms
Default:
450 ms
Set Item 36
[
ANI
]
Function:
Program and activate the ANI Identifier
See page 14 for details.
Set Item 37
[
BATT
]
Function:
Indication of the Supply Voltage.
In this mode, press the [
F/L
] key, then press the
PTT
key, to exit to normal operation.
Set Item 38
[
SKIP
]
Function:
Enable/disable skipping of a memory during scanning.
Available Values:
ON/OFF
Default:
OFF (Scanner stops when the channel is busy)
