13
Using the Squelch Feature
FT-25R/FT-25E Advance Manual
7. Press the numeric keys to input the CTCSS Tone number which corresponds to the
second tone of the CTCSS Tone Pair.
8. Press the
F
key to complete TX tone number.
9.
Press the [▲] or [▼] key select “
RX
”, then press the
F
key.
To set the RX tone number, repeat the above procedure.
10. Press the
PTT
switch to save the new setting and return to normal operation.
• The default Tone number: [
05 47
].
• Even if the first and second parts of your personal code are reversed, i.e.,
[
47 05
] from
[05 47
] they are still recognized as the same code.
Activating the Enhanced Paging & Code Squelch System
1. To activate the EPCS function, see page 9 “Se-
v
icon will appear on the LCD display.
v
While the EPCS function is activated, the CTCSS and DCS settings are
disabled.
2. Press the
PTT
switch to activate the EPCS function.
3. To disable the EPCS function, just repeat the above procedure, Press the
[▲] or [▼]
key to select “
OFF
” in step 1 above.
During EPCS operation, the
FT-25R/E
may be set up to sound a ringing
“bell” alert when an EPCS call is coming in, as described previously.See
page 11 for details.
Being Called by the Remote Station
(Standby Operation)
If the “bell” alert is turned on, when an
EPCS call is received from a remote
station the “
PAGING
” announcement
will be shown on the LCD display and
the bell will sound.
v
