Specifications
General
Frequency Range
:
Tx 136 - 174 MHz (Asian version)
144 - 148 MHz (USA version)
Rx 136 - 174 MHz
Channel Step
:
5/10/12.5/15/20/25/50/100 kHz
Standard Repeater Shift
:
±600 kHz
Frequency Stability
:
Better than ±10 ppm
[–4 °F to +140 °F (–20 °C to +60 °C)]
Modes of Emission
: F2D/F3E
Antenna Impedance
:
50 Ohms, unbalanced
Supply voltage
:
13.8 V DC ±15 %, negative ground
Current Consumption
(typical): Rx: less than 0.7 A, less than 0.3 A (squelched)
Tx: 15 A (80 W) / 9 A (30 W) / 5 A (10 W) / 4 A (5 W)
Operating Temperature Range
: –4° F to +140° F (–20° C to +60° C)
Case Size
(WxHxD):
6.3” x 2” x 7.3” (160 x 50 x 185 mm) (w/o knobs)
Weight
(Approx.):
4.2 lb (1.9 kg)
Transmitter
Output Power
:
80 W / 30 W / 10 W / 5 W
Modulation Type
:
Variable Reactance
Maximum Deviation
:
±5 kHz (Wide)
±2.5 kHz (Narrow)
Spurious Radiation
:
Better than –60 dB
Microphone Impedance
:
2 k-Ohms
Receiver
Circuit Type
:
Double Conversion Superheterodyne
Ifs
:
21.7 MHz & 450 kHz
Sensitivity
(for 12dB SINAD):
Better than 0.4 µV
Selectivity
(–6/–60dB):
12 kHz/28 kHz (Wide)
9 kHz/22 kHz (Narrow)
IF Rejection
:
Better than 70 dB
Image Rejection
:
Better than 70 dB
Maximum AF Output
:
3 W into 4 Ohms @10 % THD
Specifications subject to change without notice or obligation. Specifications
guaranteed only within Amateur band.
Frequency ranges will vary according to transceiver version; check with your
dealer.
73
FT-2980R Operating Manual
