Lamp Illumination Settings
Momentarily pressing the
L
AMP
switch lights the LCD
and keypad for
5
seconds. If
you want to toggle the lamp
on and off), press
before
pressing the
LAMP
switch.
Scan Lamp
If you want the keypad LCD to momentar-
ily light after the receiver pauses on activity dur-
ing scanning or priority channel monitoring;
Press
rotate the
select
and press
or
to set
the lamp function on or off. Press the
PTT
to
save and exit.
Ringer
Lamp
Similarly, you can have the lamp come on
while the ringer sounds during CTCSS Bell and
DTMF Paging (covered later);
Press
rotate
for
I
toturnthe
lamp function
Press the
PTT
to save
and exit.
DC
Lamp
When inserting the
FT-51R into the PA-10
Mo-
bile Power
the lamp turns on automat-
ically to illuminate the transceiver for easy
viewing at night. This automatic setting can be
changed to manual illumination:
Press
rotate the
for
or
to toggle
then press
automatic
Press the
PTT
to
save and exit.
Power-on Functions
Some default and custom transceiver set-
tings can be activated
or changed by press-
ing certain button combinations while
turning the radio on. Refer to the table
shown on page
64
for a complete list includ-
ing reference pages.
Summary of Contents for FT-51R
Page 1: ...FT 51R Dual Band FM Paging Transceiver...
Page 43: ......
