Selecting Message Operation
When sending messages, you can also have
your ID included;
else
pears at the left of the display indicating if one
or both are to be sent (and displayed). Likewise,
while receiving, this selection determines if the
ID will be correctly formatted and displayed
when a message is received. Message operation
can also be disabled completely, if desired.
To choose the message mode you will use;
Press
then repeatedly press
for the desired mode; message, message ID
or
icon displayed).
Storing Personal
ID
and Messages
(outgoing)
Before sending and receiving messages, you
will want to store your personal ID in the special
slot reserved for this purpose. Your ID could be
your callsign, name or any other identifying
characters.
To do this:
Press
and
hold
the
button for longer than
second; one of the factory message shown
at the left (or another previously stored mes-
sage) will appear
in
the lower display.
until
appears in place of the main channel
A
If not already displayed, press
I.D.
Memory Slot
DUP
S
I.D.
Code
(name, abbreviation)
up
to
8 characters in length.
quency display. If the ID slot has not been
previously overwritten, the factory pro-
grammed
ID should appear in the
lower display as shown above.
Hold
for
second
so
the first character
of the ID name blinks.
Rotate the
DIAL
to select the first character of
the message and press
(REV)
to save the entry
and move to the next place.
RPT
Repeat the above step to complete the mes-
sage.
If you make a mistake entering a
ter, press
(BAND)
to backstep to the incorrect
character, enter the correction and continue.
When the desired message is displayed, press
to save the entry and exit.
Summary of Contents for FT-51R
Page 1: ...FT 51R Dual Band FM Paging Transceiver...
Page 43: ......