108
FT-857 Operating Manual
MENU MODE No•061
[
MTR ATX SEL
]
Function
: Selects the analog meter display configuration while the transceiver is transmit-
ting.
Available Values
: PWR, ALC, MOD, SWR, VLT, N/A, OFF
Default
: PWR
PWR: Indicates the relative transmit power.
ALC: Indicates the relative Automatic Level Control voltage.
MOD: Indicates the deviation level.
SWR: Indicates the Standing Wave Ratio (forward:reflected).
VLT: Indicates the battery voltage.
N/A:
Not available at this time.
OFF: Disables the meter.
MENU MODE No-062
[
MTR PEAK HOLD
]
Function
: Enabling/disabling of the “peak hold” function of the meter.
Available Values
: OFF/ON
Default
: ON
MENU MODE No-063
[
NB LEVEL
]
Function
: Setting of the blanking level for the IF Noise Blanker.
Available Values
: 0 ~ 100
Default
: 50
MENU MODE No•064
[
OP FILTER 1
]
Not available at this time.
MENU MODE No•065
[
PG A
]
Function
: Programming the [
A
] key [in Operating Function Row “q” (
MFq
)] function.
Available Values
: All Multi Functions, all Menu Items (except Menu #065 through 070),
MONI, Q.SPL, TCALL, ATC and USER.
Default
: MONI
MENU MODE No•066
[
PG B
]
Function
: Programming the [
B
] key [in Operating Function Row “q” (
MFq
)] function.
Available Values
: All Multi Functions, all Menu Items (except Menu #065 through 070),
MONI, Q.SPL, TCALL, ATC and USER.
Default
: Q.SPL
MENU MODE No•067
[
PG C
]
Function
: Programming the [
C
] key [in Operating Function Row “q” (
MFq
)] function.
Available Values
: All Multi Functions, all Menu Items (except Menu #065 through 070),
MONI, Q.SPL, TCALL, ATC and USER.
Default
: ATC
M
ENU
O
PERATION
