background image

11

 

z

BACKTRACK Screen

Either the backtrack screen or the GPS information screen that was displayed last will 

be displayed.

Real-time navigation function

Touch [

] at the top left of the screen to display the position and direction of the 

partner station in real time during communication in C4FM digital V/D mode. (The sig-

nal of the partner station must contain location information.)

BACKTRACK function

May be register the departure point etc. up to 3 places (“

H

”, “L1”, “L2”) in advance 

and display the distance from the current location to the registered point in real time.

JA1YOE-123

 Touch the screen (other than the Touch keys)

 

z

GPS Screen

The backtrack screen, or the GPS information screen, whichever was displayed last, will 

be displayed.

The GPS satellites status and numbers are shown.

The following information is displayed.

 Direction and elevation of satellites, and their signal 

strengths

 Current latitude and longitude

 Moving Speed

 Altitude of current location

 

z

Band Scope Screen

In VFO mode, the Band Scope searches the channels above and below the center re-

ceive frequency at high speed. The signal strengths are displayed on a graph, so the 

presence or absence of a signal on any channel is easily noted.

 The frequency may be changed by turning the 

DIAL

 

knob.

 Touch  [

SEARCH

] or [

STOP

] to begin or stop the 

search.

 The number of channels to search in Band Scope may 

be set to 19, 39 or 79. (See “Setting the Search Chan-
nel for the BAND SCOPE Function” (page 63)).

Summary of Contents for FT3DR



































































































Reviews: