70
Set Mode: MEMORY Menu Operations
1 Setting Memory Bank Link
You can link multiple registered memory banks so that you can recall frequently used
memory banks immediately.
1. Press and hold the [
DISP
] key, and then touch [
MEMORY
].
2. Touch [
1 BANK LINK
].
3. Rotate the
DIAL
knob to select the memory bank you want to link, then press the
[
DISP
] key.
The checkbox is checked.
4. Repeat step 3 to link the memory banks one by one from BANK 1 to BANK 24.
2 Assigning Name to Memory Bank
By selecting [
2 BANK NAME
], you can assign a name to each memory bank using up to
16 characters.
For additional details, refer to the Advanced Manual which may be downloaded from the
Yaesu website.
3 Assigning Name to Memory Channel
By selecting [
3 MEMORY NAME
], you can assign a name such as a call sign and broad-
cast station name to each memory channel and home channel.
For additional details, refer to the Advanced Manual which may be downloaded from the
Yaesu website.
4 Memory Channel Protect Function
A memory channel may be protected so that a new frequency or memory channel tag
name cannot be registered to it.
1. Press and hold the [
DISP
] key, and then touch [
MEMORY
].
2. Touch [
4 MEMORY PROTECT
].
3. Rotate the
DIAL
knob to select the desired setting.
OFF
Allows registering to registering to memory channels.
ON
Prohibits registering to memory channels.
Remark
The default setting: OFF
5 Setting Memory Skip Function
By selecting [
5 MEMORY SKIP
], you can set the scan method for scanning memory
channels.
For additional details, refer to the Advanced Manual which may be downloaded from the
Yaesu website.
