34
Clearing Memories
1. Touch and hold [
F MW
].
2. Rotate the
DIAL
knob to select the memory channel
from which the data is to be cleared.
3. Touch [
], then touch [
M.DEL
].
Confirmation screen “
DELETE?
” is displayed.
4. Touch [
OK
] twice to clear the memory channel.
•
Data on memory channel One, and the Home channel may not be cleared.
•
The erased memory channel can be recovered by the following procedure.
Restore erased memory
1. Press the [
V/M
] key to enter the memory mode.
2. Touch and hold [
F MW
].
3. Rotate the
DIAL
knob to select the channel to be
restored.
4. Touch [
].
5. Touch [
M.REV
].
Confirmation screen “
DELETE?
” is displayed.
6. Touch [
OK
] to restore the memory channel.
Recalling the Home Channels
1. Touch [
F MW
], and then touch [
HOME
].
If [
HOME
] is not displayed, touch [
BACK ←
] to display
[
HOME
] and then touch it.
z
“HOM” and the home channel frequency of the cur-
rently selected band appears on the LCD.
2. Press the [
V/M
] key, or touch [
F MW
] and then touch
[
HOME
] to return to the previous frequency.
•
While recalling the home channel, rotate the
DIAL
knob to transfer the home channel
frequency to the operating band VFO.
•
The home channel frequency can be set not to be transferred in the Set Mode [CONFIG]
→
Changing the Home Channel Frequency
1. Set the frequency and the operating mode to be stored as a home channel.
2. Touch and hold [
F MW
].
3. Touch [
].
4. Touch [
H.WRITE
].
Confirmation screen “
OVERWRITE?
” is displayed.
5. Touch [
OK
] twice.
The beep sounds and the home channel frequency is changed.
