Page 114
FT
DX
9000D O
PERATION
M
ANUAL
M
EMORY
G
ROUPS
M
EMORY
G
ROUP
A
SSIGNMENT
1.
Press the MNU key (#
) to enter the Menu mode.
2.
Rotate the Main Tuning Dial knob (#
) to select
Menu item “GENERAL 031 MEM GROUP.”
Rotate the CLAR/VFO-B knob (#
) to set this
Menu item to “ENABLE” (the default setting is “DIS-
ABLE”).
3.
Press and hold in the MNU key for two seconds to
save the new setting and exit. Operation will now be
restricted to the six Memory Groups.
To cancel Memory Group operation, repeat steps (1)
through (3) above, choosing “DISABLE” in step (2).
Advice
Note that for the PMS memory group, the PMS memories
“P1L” through “P9U” will be so designated, so as to avoid
confusion.
C
HOOSING
THE
D
ESIRED
M
EMORY
G
ROUP
You may recall memories just within a particular Memory Group, if desired.
1.
Press the V/M key (#
), if necessary, to enter the
Memory mode.
2.
Press and hold in the MCH/GRP key (#
) (below
and to the left of the CLAR/VFO-B knob (#
))
for two seconds. The imbedded LED inside the switch
will light up.
3.
Rotate the CLAR/VFO-B knob to select the desired
Memory Group.
To exit from Memory Group operation, press and hold in
the MCH/GRP key for two seconds once more.
Advice
You will now be operating using memories only within
the selected Memory Group.
If no channels have been assigned to a particular
Memory Group, you will not have access to that Group.
Memory Channel Number
Groups Memory “OFF”
Groups Memory “ON”
01 ~ 19
1-01 ~ 1-19
20 ~ 39
2-01 ~ 2-20
40 ~ 59
3-01 ~ 3-20
60 ~ 79
4-01 ~ 4-20
80 ~ 99
5-01 ~ 5-20
P-1L/1U ~ P-9L/9U
P-1L/1U ~ P-9L/9U
CLAR/VFO-B knob
MNU key
MCH/GRP switch
CLAR/VFO-B knob
V/M key
MCH/GRP switch
Summary of Contents for FTDX-9000D
