Page 53
FT
DX
9000D O
PERATION
M
ANUAL
C
ONVENIENT
F
EATURES
“M
Y
B
ANDS
” O
PERATION
When operating on an Amateur Band on the Main (VFO-A) register, it is possible to use the BAND/MHz switch (#
)
to engage the use of the CLAR/VFO-B knob (#
) for Amateur band selection. The “My Bands” feature allows you to
select several Amateur bands, and make only those bands available for selection via the CLAR/VFO-B tuning knob.
This feature can be very useful in a contest, where the 10/18/24 MHz band are not used, or if you do not have antennas for
some bands.
“My Bands” Setup
1.
Press the MNU key (#
) to engage the Menu
mode; the Menu list will appear on the TFT.
2.
Rotate the Main Tuning Dial (#
) to select Menu
item “TUNING 135 MY BAND”.
3.
Rotate the CLAR/VFO-B knob (#
) to choose a
band that you wish to skip (omit) from the band-se-
lection loop (when using the CLAR/VFO-B knob
for band selection). The available choices are 1.8/3.5/
7/10/14/18/21/24/28/50/GEN/TRV, and the factory-
default selection is TRV (only).
4.
Press the ENT key (#
) to set the omission com-
mand to ON.
5.
Repeat steps 3 and 4 to select/deselect as many bands
as you like.
Note
The “ON” command sets the selected band to be skipped, while
the “OFF” command sets the selected
band to be included in
the band-selection list.
6.
Press and hold in the MNU key for two seconds to
lock in the new configuration and exit to normal op-
eration.
“My Bands” Operation
1.
Press the BAND/MHz switch (#
); the imbed-
ded LED will glow Red.
2.
Rotate the CLAR/VFO-B knob (#
) to choose the
Amateur band on which you wish to operate. Only
those Amateur bands that have not been skipped will
appear as you scroll through the bands.
MAIN tuning dial knob
MNU key
ENT key
BAND/MHz knob
CLAR/VFO-B knob
1.8MHz
3.5
7
10
14
18
21
24
28
50
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
TRV
GEN
3.5
7
14
21
28
MHz
MHz
MHz
MHz
MHz
«
3.5MHz
7MHz
14MHz
21MHz
28MHz
CLAR/VFO-B knob
Summary of Contents for FTDX-9000D
