112
Functions to Use as Necessary
Connecting an external device
• Data cable “CT-163” (optional)
To the
transceiver
To the computer, etc.
To the TCN, etc.
➀
PKD (packet data input)
➁
GND
➂
PSK (PTT)
➃
RX 9600 (9,600 bps packet data output)
➄
RX 1200 (1,200 bps packet data output)
➅
PK SQL (squelch control)
➆
TXD (serial data output [transceiver → PC])
➇
RXD (serial data input [transceiver ← PC])
➈
CTS (data communication control)
➉
RTS (data communication control)
Dsub 9 pin
➀
–
➁
TXD (serial data output [transceiver → PC])
➂
RXD (serial data input [transceiver ← PC])
➃
–
➄
GND
➅
–
➆
CTS (data communication control)
➇
RTS (data communication control)
➈
–
DIN 6 pin
➀
PKD (packet data input)
➁
GND
➂
PSK (PTT)
➃
RX 9600 (9,600 bps packet data output)
➄
RX 1200 (1,200 bps packet data output)
➅
PK SQL (squelch control)
Tips
• Make sure to turn off the transceiver before connecting cables.
• For details on connecting to a TNC or computer, see the instruction manual supplied with the TNC.
• The computer may cause interference with reception.
When signals cannot be received normally, move the computer away from the transceiver and use
a photo-coupler and noise filter to connect.
●
Setting the packet communication operation
1
Turn on the transceiver.
2
Press and hold
for over one second.
The Setup menu appears.
3
Rotate the DIAL to select
[9 DATA]
, then press
.
The menu list appears.
