133
Customizing Menu Settings and User Preferences
Setup menu operations: 5 SCAN
Setting the signal reception method (1 DUAL WATCH STOP)
While operating in the DW (Dual Watch) mode, the receive operation after detecting
signals on the home channel may be changed.
For details, see “Setting the dual receive restart setting” on page 71.
Setting the scanning direction (2 SCAN DIRECTION)
In the Setup menu, from
[8 CONFIG]
→
[10 MIC PROGRAM KEY]
, assign
[SCAN]
to one of the
[P1]
to
[P4]
keys on the microphone to set whether to scan in the higher
direction or lower direction of the frequencies or memory channels when scanning on
that key.
For details on how to assign the function to
[P1]
to
[P4]
, see “Setting the program keys
on the microphone (10 MIC PROGRAM KEY)” on page 138.
1
Press and hold
for over 1 second.
The Setup menu appears.
2
Rotate the DIAL to select
[5 SCAN]
, then press
.
3
Rotate the DIAL to select
[2 SCAN DIRECTION]
,
then press
.
4
Rotate the DIAL to set the desired setting.
1 UP: Scans in the higher direction of the frequencies
or memory channels.
2 DOWN: Scans in the lower direction of the
frequencies or memory channels.
Tip
The default setting: 1 UP
5
Press and hold
for over 1 second.
Sets the scanning direction and returns the screen to the previously viewed screen.
