67
Scanning
Searching for signals
Scanning only the specified memory channels
1
Select the band to be scanned, and then switch to memory mode.
2
Press and hold
for over one second.
The Setup menu appears.
3
Rotate the DIAL to select
[3 MEMORY]
, then press
.
The menu list appears.
4
Rotate the DIAL to select
[2 MEMORY SCAN TYPE]
, then press
.
The menu list appears.
5
Rotate the DIAL to select
[2 SELECT MEMORY]
.
6
Press and hold
for over one second.
The display is returned to the previously viewed screen.
7
Press and hold
[UP]
or
[DWN]
on the microphone for over one second.
Scanning of the specified memory channels begins.
Tips
• Pressing
[UP]
scans in the memory channel numbers in the upward direction, whereas
pressing
[DWN]
scans the memory channel numbers in the downward direction.
• To cancel scanning, press
[PTT]
on the microphone (this does not put the transceiver into
transmit mode).
Setting memories to skip
Memory channels which you do not want to receive can be skipped during scanning.
1
Press and hold
for over one second.
The MEMORY WRITE screen appears.
2
Press
, (
appears on the left side).
3
Rotate the DIAL to select the desired memory
channel.
