139
C
u
s
to
m
iz
in
g
M
e
n
u
S
e
tti
n
g
s
a
n
d
U
s
e
r P
re
fe
re
n
c
e
s
Setup menu operations: 8 CONFIG
3
Rotate the DIAL to select
[10 MIC PROGRAM KEY]
,
then press
.
The microphone program key setting screen
appears.
4
Rotate the DIAL to select the program key ([P1] to
[P4]) to which you want to assign a function, then
press
.
5
Rotate the DIAL to select the function you want to
assign to the key, then press
.
6
Repeat the assigning operation for other keys.
Repeat the steps 4 to 5 to assign functions to other keys.
Function
Description
OFF
Deactivates the program key function
SQL TYPE
Changes the squelch type
SCAN
Starts/stops scanning (available while performing
PMS)
HOME
Recalls the home channel
DCS CODE
Selects the DCS code
TONE FREQ
Selects the tone frequency
RPT SHIFT
Activates the repeater shift function
REVERSE
Reverse function
TX POWER
Sets the transmission power level
SQL OFF
Deactivates the squelch function
T-CALL
T-CALL function
VOICE
Announces the current frequency (available
when the optional FVS-2 is attached)
D_X
Functions of the
key on the front panel
WX
Switches operation to the Weather Channel Bank
S-LIST
Displays the station list
MSG
Displays the message list
REPLY
Enters APRS reply message writing mode
M-EDIT
Enters APRS message writing mode
7
Press and hold
for over one second.
Assigns the selected function to the program key and returns the display to the
previously viewed screen.
Tip
The default setting: P1: SQL OFF (T.CALL: European version)
P2: HOME
P3: D_X
P4: TX POWER
