31
Receiving APRS Beacons
4
Press
[
].
5
Turn the DIAL and select
[2 FILTER]
.
6
Press
and select the condition for narrowing
down the list.
The condition for narrowing down the list changes
each time
is pressed.
The position comment can be select from among the following.
ALL
All the received beacons will be displayed.
MOBILE
Only mobile stations will be displayed.
FREQUENCY
Only stations with frequency information will be displayed.
OBJECT/ITEM
Only object stations/item stations will be displayed.
DIGIPEATER
Only digipeater stations will be displayed.
VoIP
Only VOIP stations such as WIRES stations will be displayed.
WEATHER
Only meteorological stations will be displayed.
YAESU
Only stations using Yaesu wireless transceivers will be displayed.
OTHER PACKET
Only RAW NMEA data station, status station, and packet information that
could not be analysed (non-APRS format) will be displayed.
Please set “7 OTHER” to ON under
[10 APRS]
→
[3 APRS FILTER]
in the
set-up menu to display non-APRS packets that cannot be analyzed.
CALL RINGER
Only stations whose call signs are set using
[10 APRS]
→
[9 APRS
RINGER (CALL)]
in the set-up menu are displayed.
RANGE RINGER
Only stations that are close to the distance set using
[10 APRS]
→
[8 APRS
RINGER]
in the set-up menu are displayed.
1200 bps
Only stations received using 1200 bps (A12) packets are displayed.
9600 bps
Only stations received using 9600 bps (A96) packets are displayed.
Tip
Factory default value: ALL
7
Press
for one second or longer.
The sorting conditions are set and the display returns to the “STATION LIST” screen.
8
Press
[
].
Only the stations meeting the set conditions are displayed on the list.
