5
APRS Initial Settings
6
Turn the DIAL, select
[20 MY POSITION]
, then press
.
The screen for setting your own station’s information
will be displayed.
7
Press
.
The cursor will shift to the latitude item.
8
Turn the DIAL, select north latitude (N) or south
latitude (S), then press
[
].
The cursor will shift to the “degrees” setting item.
Tip
Press [
] → The cursor will shift to the left.
Press
[
] → The cursor will shift to the right.
The cursor will shift to the right (or left) each time
(or
) is pressed.
9
Turn the DIAL, input the degrees, then press
[
].
The cursor will shift to the “minutes” setting item.
10
Turn the DIAL, input the minutes, then press
[
].
The cursor will shift to the “1/100 minutes” setting
item.
11
Turn the DIAL, input the 1/100 minutes value, then
press
[
].
The cursor will shift to the longitude item.
12
Turn the DIAL, select east longitude (E) or west
longitude (W), then press
[
].
The cursor will shift to the “degrees” setting item.
13
In the same way as for steps 9 to 11, input the
degrees, minutes and 1/100 minutes.
14
Press
.
The latitude and longitude will be set.
15
Press
for one second or longer.
The display will return to the previous screen.
Tips
•
Please use the map of WGS-84 (world geodetic reference system) to find out the latitude and
longitude.
•
In this device, the position information is displayed using both second and 1/100th minute formats.
Please check and enter the map display method to be used (second÷60×100=1/100 minute).
