65
Using the APRS set-up menu
12
Turn the DIAL and select
[5
BARO]
.
13
Press
and select the unit of atmospheric
pressure.
You can change the unit of atmospheric pressure.
Press to switch between hPa, mb, mmHg, and inHg.
Tip
Factory default value: mb
14
Turn the DIAL and select
[6
TEMP]
.
15
Press
and select the unit of temperature.
You can change the unit of temperature.
Pressing switches between °C and °F.
Tip
Factory default value: °F
16
Turn the DIAL and select
[7
RAIN]
.
17
Press
and select the unit of precipitation.
You can changetheunit of precipitation.
Pressing switches between millimeters and
inches.
Tip
Factory shipping value: inch
18
Turn the DIAL and select
[8
WIND]
.
19
Press
and select the unit of wind speed.
You can changetheunit of wind speed.
Press to switch between m/s, mph, and knots.
Tip
Factory default value: mph
20
Press
for one second or longer.
The unit of the APRS display will be set and the display will return to the previous
screen.
Transmission beacon information setting
The transmission information can be set when transmitting an APRS beacon.
1
Press
for one second or longer.
The set-up menu will be displayed.
2
Turn the DIAL, select
[10 APRS]
, then press
.
The menu list will be displayed.
3
Turn the DIAL, select
[12 BEACON INFO SELECT]
,
then press
.
The screen for setting the transmission information
will be displayed.
4
Turn the DIAL and select
[1 AMBIGUITY]
.
