71
Using the APRS set-up menu
6
Press
.
The screen will return to the list of message groups and the registered group filter
will be displayed.
7
Press
for one second or longer.
The group filter will be set and the display will return to the previous screen.
Automatic response setting of received messages
A reply message set up beforehand can be automatically sent out upon receiving a
message.
1
Press
for one second or longer.
The set-up menu will be displayed.
2
Turn the DIAL, select
[10 APRS]
, then press
.
The menu list will be displayed.
3
Turn the DIAL, select
[18 MESSAGE REPLY]
, then
press
.
The automatic reply setting screen will be displayed.
4
Turn the DIAL and select
[1 REPLY]
.
5
Press
and select ON or OFF.
Pressing turns this function ON and OFF.
ON: A reply message is returned automatically when
a message is received.
OFF: A reply message is not returned when a message is received.
Tip
Factory shipping value: OFF
6
Turn the DIAL, select
[2 CALLSIGN]
, then press
.
The cursor will shift to the left of the call sign.
Tip
Please set this only when you want to reply to a specific
station. Please proceed to Step9if this is not required.
7
Turnthe DIAL and select characters.
Please register the call sign as follows.
∗∗∗∗∗∗
-NN
∗
: call sign (6 characters maximum)
NN: SSID (a number between 1 and 15 or nil)
Tip
You can enter capital letters, numbers, and a certain symbol (only “
∗
” can be used).
Press [
] → This switches between letters, numbers, and
∗
.
Press [
] → This deletes all characters to the right of the cursor..
Press [
] → The cursor will shift to the left.
Press [
] → The cursor will shift to the right.
Press [
] → This deletes all characters to the left of the cursor.
Please refer to “Input characters” ( P. 20) in the basic operating manual for details.
