11
APRS Initial Settings
3
Turn the DIAL, select
[2 DATA SPEED]
, then press
.
The screen for selecting the baud rate will be
displayed.
4
Turn the DIAL, select
[APRS]
, then press
.
The baud rate enclosed within the parentheses [ ]
will blink.
5
Turn the DIAL to select the baud rate.
The baud ratewill switch between “1200 bps” and “9600 bps” when the DIAL is
turned.
Tips
• Factory default value: 1,200 bps
• When receiving a message, the baud rate will automatically match the baud rate of the
partner station signal regardless of the value set.
6
Press
for one second or longer.
The baud rate will be set and the display will return to the previous screen.
Other settings
Besides these, other settings such as the mute setting for the receive audio sound of the
APRS operating band can also be configured. Please refer to “Using the APRS set-up
menu” ( P.57) for the details.
