34
Transmitting APRS Beacons
Your own station information in the device can be transmitted as a beacon.
Manually transmitting APRS beacons
Beacons can be manually transmitted where required.
●
Transmitting from the “STATION LIST” screen
1
Display the “STATION LIST” screen.
2
Press
[
].
The APRS beacon will be transmitted.
●
Transmitting from the beacon details screen
1
Display the beacon details screen.
2
Press
[ ].
The extension key switches.
3
Press
[
].
The APRS beacon will be transmitted.
Tip
A “ding dong dong...” bell ring will sound when a beacon of your own station relayed by the digipeater
is received.
Sending an APRS beacon automatically
An APRS beacon can be sent automatically at a fixed interval.
1
Press
for one second or longer.
The set-up menu will be displayed.
