4
APRS Initial Settings
4
Turn the DIAL and select
[1 GPS]
.
5
Press
.
“1 GPS” will be selected, and the screen will return
to the menu list.
6
Press
for one second or longer.
The display will return to the previous screen.
Tip
Using the GPS function, the time data received from a GPS satellite will be automatically used to
correct the in-built clock of the main device.
Setting the function manually
The latitude and longitude of your own station can be entered by following the procedure
below, when not using the GPS function. This may be necessary when the GPS
satellites cannot be acquired or the radio is used in a fixed location.
(1) Matching the time
Please refer to “Adjusting the date and time” ( P.46) in the basic operating manual for
the details.
(2) Registering position information
1
Press
for one second or longer.
The set-up menu will be displayed.
2
Turn the DIAL, select
[10 APRS]
, then press
.
The menu list will be displayed.
3
Turn the DIAL, select
[19 MY POSITION SET]
, then
press
.
The screen for selecting the setting method of the
position information will be displayed.
4
Turn the DIAL and select
[2 MANUAL]
.
5
Press
.
“2 MANUAL” will be selected, and the screen will
return to the menu list.
