12
Name and function of each component
Panel (front)
V/M(MW) key
z
Press:
Each key press switches between VFO mode
and memory mode.
When a memory channel is recalled, the memory
channel number is displayed, such as “M-ALL 001”.
The last operated memory channel is recalled.
z
Press and hold:
The memory channel list screen is displayed.
Write to memory or recall and edit a stored memory
channel.
VOL
knob
Adjust the audio volume.
A/B key
z
Press:
Select the operation band.
Each press of this key switches between A band
and B band.
z
Press and hold:
Displays or hides Sub Band.
GM key
z
Press:
The GM (Group Monitor) function is turned ON
and automatically checks whether other stations
are within the communications range.
• To use the GM function, the other station must
also have the GM function turned ON.
• For details on using the function, refer to the
GM Function Instruction Manual which may be
downloaded from the Yaesu website.
z
Press and hold:
The DG-ID number setting screen is displayed.
1. Rotate th
e DIAL
knob to select [
DG-ID TX
]
(transmit DG-ID number) or [
DG-ID RX
] (receive
DG-ID number) and press the
DIAL
knob.
2. Rotate th
e DIAL
knob to select the DG-ID
number (00 to 99) and press the
DIAL
knob.
Press and hold the
DIAL
knob to reset both the
send and receive DG-ID numbers to “
00
” at once.
D X
key
z
Press:
Each time this key is pressed the communication
mode changes:
AMS(
/
)
DN
FM
AMS ...
Normally, the communication mode is set to
automatically receive the mode of the partner
station, by setting to “AMS” (AMS display example:
/
), which can receive the signal of the other
station.
z
Press and hold:
Start the WIRES-X.
• The WIRES-X enables worldwide digital communication
in digital communication systems via the Internet.
(For details on this function, refer to the WIRES-X
Function Instruction Manual which may be
downloaded from the Yaesu website.)
• Press and hold the [
D X
] key again to return to
the normal operation screen.
POWER (
) Switch
Press and hold this button to switch the power
ON or OFF.
When the power is ON, press this button briefly to
engage, or release the key lock.
Full color screen display
Displays the frequencies and the various
settings.
