75
Restoring to Defaults (Reset)
Caution
When the All Reset function is performed, all data registered in the memory will be deleted. Be sure
to note the settings on paper or back up the data on a microSD memory card.
All Reset
To restore all transceiver settings and memory content to the factory defaults.
1. Press and hold the [
F
menu
] key.
The Setup Menu screen will be displayed.
2. Press the
DIAL
knob to select [
124 FACTORY RESET
],
then press the
DIAL
knob.
“
FACTORY RESET
” appears on the LCD.
CONFIG RECALL
122
CONFIG SET
121
123
124
RESET
SOFTWARE VERSION >
FACTORY RESET
>
3. Rotate the
DIAL
knob to select [
OK
].
To cancel the resetting, select [CANCEL], then press the DIAL knob.
4. Press the
DIAL
knob to reset all.
After resetting all defaults, the call sign input message appears on the LCD. Set the
Memory Channels Reset
To erase only the registered all memory channels.
1. Press and hold the [
F
menu
] key
[
119 MEMORY CH RESET
]
“MEMORY CH RESET” appears on the LCD.
2. Rotate the
DIAL
knob to select [
OK
].
To cancel the resetting, select [CANCEL], then press the DIAL knob.
3. Press the
DIAL
knob to delete all memory contents.
APRS Reset
To restore all APRS settings to the factory defaults.
1. Press and hold the [
F
menu
] key
[
120 APRS RESET
]
“APRS RESET” appears on the LCD.
2. Rotate the
DIAL
knob to select [
OK
].
To cancel the resetting, select [CANCEL], then press the
DIAL
knob.
3. Press the
DIAL
knob to delete all APRS settings.
