15
Basic Operation
FTM-3200DR Operating Manual
Frequency Navigation
Using the Dial
Rotating the
DIAL
knob allows tuning in the
pre-programmed steps. Clockwise rotation
tunes the frequency upwards, whereas coun-
terclockwise rotation tunes the frequency
downwards.
r
Press the [
MHz
(
SETUP
)] key momentarily,
then rotate the
DIAL
knob, to change the
frequency steps to 1 MHz per step.
VOL
DIAL
SQL
TXPO
D W
M W
SETUP
REV
D/A
V / M
M H z
Using the MH-48A6JA Microphone
Using the
[
UP
]
and
[
DWN
]
key:
Pressing [
UP
] momentarily, tunes the frequen-
cy upwards. Whereas pressing [
DWN
] momen-
tarily tunes the frequency in the downwards di-
rection.
Using the number keys:
Use the [0] to [9] number keys to directly input
the frequency.
There is no “decimal point” key on the MH-
48A6J keypad. However, there is a short-cut
for frequencies ending in zero:
press the [#] key after the last non-zero digit.
UP
DWN
Number
keys
Examples:
To enter 146.520 MHz, press [1]
à
[4]
à
[6]
à
[5]
à
[2]
à
[0]
To enter 146.000 MHz, press [1]
à
[4]
à
[6]
à
[#]
Channel Step Selection
The
DIAL
and microphone [
UP
]/[
DWN
] keys frequency tuning step can be changed.
Note:
See Setup Menu Item “
STEP 43
” on page xx.
Application for FCC / IC
FCC ID: K6620523X50 / IC: 511B-20523X50
