16
Basic Operation
FTM-3200DR Operating Manual
Selecting the communication mode
The FTM-3200DR transceiver is equipped with the AMS (Automatic Mode Select) function
which automatically selects from 4 modes of transmission corresponding to the signal
being received.
The transmit mode is selected according to the received signal so that C4FM digital
signals, and analog signals are received and transmitted automatically.
Press [
D/A
(
GM
)] key to display “
” (blinks) icon on the screen.
Display example when in AMS mode
To operate in fixed communication mode, press [
D/A
(
GM
)] key to switch the communication
mode.
Each time [
D/A
(
GM
)] key is pressed, the communication mode changes in the following
order:
à
AMS (“
” blinks)
à
V/D (“
” lights up)
à
FM (no icon)
à
Communication mode
Icon
Description of modes
AMS (Automatic Mode Select)
(blinks)
Transmission mode is automatically selected
from
4 types
according to the signal received.
The AMS function operation can be changed
from the Setup menu setting. See “Setting the
transmission mode when using the AMS function
(DIG AMS 11)” on
page xxx
.
V/D Mode
(Voice/Data simultaneous
transmission mode)
(light up)
Calls are less prone to interruptions due to
detection and correction of voice signals during
digital voice signal transmission. This is the
standard mode for C4FM Digital.
Analog FM Mode
no icon
Analog communication using FM mode.
Effective when the signal is weak and audio is
susceptible to interruption in digital mode.
Application for FCC / IC
FCC ID: K6620523X50 / IC: 511B-20523X50
