13
104
W
x
140
H
x
215
D
(mm)
164
W
x
157
H
x
231
D
(mm)
224
W
x
157
H
x
241
D
(mm)
LDX-60
LDX-120
LDX-180
100VAC, 120VAC, 220-240VAC 50/60Hｚ
±5％
40 W
45 W
50 W
20～60
(mm)
20～120
(mm)
20～180
(mm)
15～60
(mm)
15～120
(mm)
15～180
(mm)
10～999mm
100mm/sec ～ 200mm/sec
Φ250
Φ200
Φ300
2.1ｋｇ
3.3kg
4.6ｋｇ
Trouble shooting
Please check the followings before contacting the supplier.
Machine doesn't run
even if turning the
switch on
It remains unplug
The fuse has blown out
Please make sure that it is definitely plugged.
Please replace the new fuse. However, please
stop using the machine if the fuse has constantly
blown out.
Auto mode doesn't
work
It is set as Manual mode
There is some substances on the sensor
Label doesn't pass through the sensor
The source of light is close to the sensor
Please select the mode.
please remove the substances.
Please place the sensor at the proper position.
Please make sure that the source of the light
doesn't reflect straight to the sensor.
※
Please note that it can't be used in the terms of
use condition or what kind of label you use.
Label Setting Mode
differs from the one
as registered
Label setting value is just for your reference.
And it may differ from the one as display.
In addition, there may be slight differences in
the width of the label, Motor Speed Setting,
and sensor angle.
If you still have any problems even though you check the detail as
mentioned above, please contact your distributer or our company.
Specification
Model No.
Power Supply
Range of Input Voltage
Power Consumption
Outer Dimension
Weight
Material
Adjustable Width
of Label Holder
Usable Width
Usable Length
Feed Speed
Maximum Roll Diameter
Accessories
(Possible to adjust 6 level of the speed)
Anti-Static ABS
Hexagonal Spanner for Adjustment
●
In some cases, it doesn't work well as depends on the label and shape even if it is within the above specification.
●
It is subject to change the specification without prior notice.
