Yaesu M-100, Manual

6

 Controls & Connections

M-100 Operating Manual

 MIC

The unit includes a built-in dynamic microphone and a condenser micro-

phone that are developed for communications equipment. The condenser 

microphone provides crisp sound with transparent frequency characteristics 

up to high frequencies. The dynamic microphone produces a thick, deep, 

warm sound quality that is suited for informal chatting. It is also possible to 

combine the audio output signals from the two microphone elements.

The included treble boost cowling may be 

installed to block sounds from the sides 

of the microphone, resulting in unique fre-

quency characteristics as if the sound were 

condensed with a peak response in the vi-

cinity of 1 to 1.5 kHz. To install the cowling, 

press it straight on from the front to cover 

the microphone. To remove, slide it straight 

off.

Treble boost 

cowling

  Angle adjustment knobs

The angle of the microphone may be adjust-

ed by loosening (turn counterclockwise) the 

knobs on the left and right side of the pivot 

top. Place the microphone in the desired po-

sition and then tighten the knobs (turn them 

clockwise) to secure the microphone.

  Height adjustment ring

The height of the microphone can be precisely 

adjusted. Turn the compression ring counter-

clockwise to loosen the top tube, and then raise 

or lower the top section to the desired position. 

Turn the compression ring clockwise to tighten it 

and hold the microphone in place.

The stand can be extended a maximum of 6 cm.