FCC ID: K66VX-3200V-2
Alignment
6/6
Vertex Standard Co., Ltd.
DCS Deviation (Wide): 0.60[kHz](±0.1[kHz])
DCS Deviation (Narrow): 0.30[kHz](±0.1[kHz])
The actual DCS deviation will increase around 20% based on the above alignment as
follows,
Actual DCS Deviation (Wide): 0.70[kHz]
Actual DCS Deviation (Narrow): 0.35[kHz]
[1]
Common RX
- [0] Tight NSQL
This parameter is used to align the noise level in squelch Tight.
It adjusts this alignment RX Tuning after ending.
Select the MID frequency channel in alignment range.
Set the SG output level to 0dB
µ
EMF, and obey the message.
- [1] Threshold NSQL
This parameter is used to align the noise level in squelch Threshold.
It adjusts this alignment RX Tuning after ending.
Select the MID frequency channel in alignment range.
Set the SG output level to -8dB
µ
EMF, and obey the message.
- [2] RX Tune
This parameter is used to align RX Tune.
Select the MID frequency channel in alignment range.
Set the SG output level to -7dB
µ
EMF.
Pressing the [DWN] key, reduce the RX Tune Level and set the SINAD above 12dB.
