VX-450 S
ERIES
O
PERATING
M
ANUAL
28
REC
(
R
EQUIRES
THE
DVS-8
OR
DVS-9
)
Press (or press and hold) the assigned Programmable
key to enable the Voice Recording Mode. If the in-
coming signal is received, so as to un-mute the
squelch and pass audio, then the “
” Icon will flash
and received audio will be recorded. When the voice
recording is completed, the “
” stays on.
PLAY
(
R
EQUIRES
THE
DVS-8
OR
DVS-9
)
Press (or press and hold) the assigned Programmable
key to play back the last message.
To stop the play-back, press the [
C
] key.
While playback is proceeding, you may press the [
A
]
key or [
] key (
VX-459
) to jump to the previous
message, or press the [
B
] key or [
#
] key (
VX-459
)
to jump to the next message.
TX S
AVE
D
ISABLE
Press (or press and hold) the assigned Programmable
key to disable the Transmit Battery Saver, if you are
operating in a location where high power is almost
always needed.
The Transmit Battery Saver helps extend battery life
by reducing transmit power when a very strong sig-
nal from an apparently nearby station is being re-
ceived. Under some circumstances, though, your
hand-held radio may not be heard well at the other
end of the communication path, and high power may
be necessary at all times.
L
OCK
Press (or press and hold) the assigned Programmable
key to lock the
CH
Selector knob, Programmable
keys, and
PTT
switch. The precise lockout
configulation is programmed by your Dealer.
A
DVANCED
O
PERATION
