VX-8DR O
PERATING
M
ANUAL
115
You may check your work by monitoring the entered DTMF string. To do this,
repeat steps 1 - 4 above, then press the
key.
To send a telephone number
:
1.
Press the
key, then press the
key. This provides a
“Short-cut” to Set Mode Item
29: DTMF MANUAL
/
AUTO
.
2.
Rotate the
DIAL
knob to select “
AUTO
” (to activate the
DTMF Autodialer function).
3.
Press the
PTT
switch to exit to normal operation and acti-
vate the DTMF Autodialer function (the “
” icon will ap-
pear).
4.
In the Autodialer function mode, first press the
PTT
key,
then press the numerical key (
through
, and
:
representing “10”) corresponding to the DTMF memory
string you wish to send. Once the string begins, you may
release the
PTT
key, as the transmitter will be held “on the
air” until the DTMF string is completed.
To disable the DTMF Autodialer, just repeat the above procedure, rotating the
DIAL
knob
to select “
MANUAL
” in step “2” above.
1) You can change the DTMF Autodialer sending speed, using Set Mode
Item 31: DTMF SPEED, see page 146 for details.
2) You can also set a longer delay between the time your transmitter is keyed
and the first DTMF digit is sent, using Set Mode Item 28: DTMF DELAY, see page 146
for details.
DTMF O
PERATION
Summary of Contents for VX-8DR
