VX-8GE O
PERATING
M
ANUAL
46
L
ABELING
M
EMORIES
You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aid
in recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
using the Set Mode.
1.
Recall the memory channel on which you wish to append a
label.
2.
Press and hold the
m
key for one second to enter the Set
Mode.
3.
Rotate the
DIAL
knob to select Set Mode Item
48: MEMORY
NAME
.
4.
Press the
m
key briefly to enable programming of the
name tag. Press and hold the
h
key for two seconds to
clear any previous name, if desired.
5.
Rotate the
DIAL
knob, or press one of the keyboard keys,
to select the first digit of the desired label.
Example 1
: Rotate the
DIAL
knob to select any of the 61
available characters.
Example 2
: Press the
8
key repeatedly to toggle among
the seven available characters associated with
that key:
t
u
v
8
T
U
V
6.
Press the
M
key to move to the next character, if needed.
7.
Repeat steps 5 and 6 to program the remaining letters, num-
bers, or symbols of the desired label. A total of 16 charac-
ters may be used in the creation of a label.
8.
Press and hold the
h
key for two seconds to delete all
data after the cursor that may have been previously stored.
9.
If you make a mistake, press the
B
key to backspace the cursor, then re-enter the
correct letter, number, or symbol.
10. When you have completed the creation of the label, press the
PTT
switch briefly to
save the label and exit to normal operation.
During Memory Recall (“MR”) with Mono Band operation, the
alphanumeric Tag will appear below the frequency display.
The alphanumeric Tag does not appear if you activate
the Dual Receive Mode.
M
EMORY
M
ODE
(
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
)
Summary of Contents for VX-8GE
Page 71: ...VX 8GE OPERATING MANUAL 69 NOTE ...
Page 125: ...VX 8GE OPERATING MANUAL 123 NOTE ...
Page 165: ...VX 8GE OPERATING MANUAL 163 NOTE ...
