VX-8GR/GE O
PERATING
M
ANUAL
100
FRG
(
“F
RIENDLY
R
ADIO
G
ROUP
”
)
M
ODE
You may access other Internet Link Systems (including WIRES
™
in the FRG mode) that
use a DTMF string for access.
P
ROGRAMMING
THE
FRG
CODE
Load the DTMF tones which you wish to use for Internet-link access into an Internet
Memory Register. For purposes of this example, we will use “#1101D” as the access code
of the W6DXC node.
1.
Press and hold the
m
key for one second to enter the Set Mode.
2.
Rotate the
DIAL
knob to select Set Mode Item
40:
INTERNET SELECT
.
3.
Press the
key briefly to enable adjustment of this Set
Mode Item.
4.
Rotate the
DIAL
knob to select the DTMF Memory register
(“
1
” - “
64
”) into which you wish to store the access code.
5.
If you wish to attach an alpha/numeric name “Tag” to the
Internet Memory, proceed to the next step; otherwise press
the
B
key then skip to step 13.
6.
Press the
M
key briefly to enable programming of the
name tag.
7.
Rotate the
DIAL
knob to select the first digit of the desired
label.
8.
Press the
M
key to move to the next character.
9.
If you make a mistake, press the
B
key to back-space
the cursor, and then enter the correct letter, number, or sym-
bol.
10. Repeat steps 7 through 9 to program the remaining letters,
numbers, or symbols of the desired label. Eight characters
may be used in the creation of a label.
11. When you have programmed a label that is less than 8 char-
acters, press the
M
key
twice
to confirm the label and
enable storing the access code; otherwise, just program the
8 character label and press the
M
key
one time
.
12. Rotate the
DIAL
knob to select “
#
”.
13. Press the
M
key briefly to accept the first digit and move
to the second digit of the DTMF string.
14. If you make a mistake, press the
B
key to backspace
the cursor, and then enter the correct letter or number.
15. Repeat steps 12 through 14 until you have completed the
access code (“#1101D”).
I
NTERNET
C
ONNECTION
F
EATURE
