VX-8R O
PERATING
M
ANUAL
105
S
ENDING
A
M
ESSAGE
The registered message can be sent to the members who are receiving on the coordination
frequency. When a message is sent, the transmitter’s ID will be sent also, and the receiver
can identify who sent the message.
The “Personal ID” setting (described in the previous paragraph) is required for
the transmitter’s ID to be shown with the received message.
1. Set the radio to the coordination frequency.
2. Press and hold the
key for one second to enter the Set Mode.
3. Rotate the
DIAL
knob to select Set Mode Item
59: MES-
59: MES-
59: MES-
59: MES-
59: MES-
SAGE SELECT
SAGE SELECT
SAGE SELECT
SAGE SELECT
SAGE SELECT
.
4. Press the
key briefly to enable adjustment of this Set
Mode Item.
5. Rotate the
DIAL
knob to select the desired Message slot
you wish to send.
6. Press the
PTT
switch to exit to normal operation.
7. Press the
key, then press the
key. This provides a
“Short-cut” to Menu Item
95: SQL TYPE
95: SQL TYPE
95: SQL TYPE
95: SQL TYPE
95: SQL TYPE
.
8. Rotate the
DIAL
knob until “
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
” appears on the
display; this activates the Message feature.
9. Press the
PTT
switch to exit from the Menu mode and acti-
vate the Message feature. When the Message feature is ac-
tivated, the “
MSG
MSG
MSG
MSG
MSG
” notation will appear on the display.
10. Press the
PTT
switch again (without speaking into the mi-
crophone) to transmit the selected message on the coordina-
tion frequency. It takes approximately 6 seconds to transmit the message.
M
ESSAGE
F
EATURE
Summary of Contents for VX-8R
Page 61: ...VX 8R OPERATING MANUAL 59 NOTE ...
Page 77: ...VX 8R OPERATING MANUAL 75 NOTE ...
