VX-8R O
PERATING
M
ANUAL
120
S
ENSOR
M
ODE
S
ENSOR
M
ODE
O
PTIONS
C
LOCK
S
ET
The
VX-8R
has a 24-hour clock with a calendar which covers all dates from January 1,
2000 through December 31, 2099 (accuracy: ±30 sec/month).
To set the clock:
1. Press and hold the
key for one second to enter the Set Mode.
2. Rotate the
DIAL
knob to select Set Mode Item
98: TIME
98: TIME
98: TIME
98: TIME
98: TIME
SET
SET
SET
SET
SET
.
3. Press the
key briefly to enable adjustment of this Menu
Item.
4. Rotate the
DIAL
knob to select the “
year
” setting.
5. Press the
key briefly, then rotate the
DIAL
knob to
select the “
month
” setting.
6. Repeat the above step to set the “
day
,” “
day of the week
,”
“
hour
,” and “
minute
” selections.
7. Press the
key briefly, then rotate the
DIAL
knob to set
“Timer Signal” On (
SIG
SIG
SIG
SIG
SIG
) or Off (
––
––
––
––
––
). In the “
SIG
SIG
SIG
SIG
SIG
” mode, a
double-beep will be emitted from the speaker at the top of
each hour, as long as the transceiver is turned on.
8. Press the
key briefly, press the
key to start the clock from “00” seconds.
9. When you have finished the time setup, press the
PTT
switch to save the new setting
and return to normal operation.
The VX-8R has a rechargeable Li-Ion battery cell used just for the clock.
Therefore, the VX-8R can maintain its clock data for approximately two
months without using the main battery pack or external DC power.
Summary of Contents for VX-8R
Page 61: ...VX 8R OPERATING MANUAL 59 NOTE ...
Page 77: ...VX 8R OPERATING MANUAL 75 NOTE ...
