VX-8R O
PERATING
M
ANUAL
29
C
HANGING
THE
C
HANNEL
S
TEPS
The
VX-8R
’s frequency synthesizer provides the option of utilizing tuning steps of 5, 6.25,
8.33, 9, 10, 12.5, 15, 20, 25, 50, 100, and 200 kHz per step. The
VX-8R
is set up at the
factory with different default steps for each operating band which are probably satisfactory
for most operation. However, if you need to change the channel step increments, the proce-
dure to do so is very easy.
1. Press the
key, then press the
key on the left side of the radio. This provides a
“Short-cut” to Set Mode Item
96: STEP FREQUENCY
96: STEP FREQUENCY
96: STEP FREQUENCY
96: STEP FREQUENCY
96: STEP FREQUENCY
.
2. Rotate the
DIAL
knob to select the desired step size.
3. Press the
PTT
switch to save the new setting and return to
normal operation.
1) 9 kHz steps are available only when receiving on the BC band.
2) 8.33 kHz steps are available only when receiving on the Air band.
3) While operating on the BC band, you may only select channel steps of 9
kHz or 10 kHz; the other step selections are disabled.
4) 5 kHz steps are not available for use on 250 - 300 MHz, nor above 580 MHz.
C
HANGING
THE
R
ECEIVING
M
ODE
The
VX-8R
provides for automatic mode changing when
the radio is tuned to different operating frequencies. How-
ever, should an unusual receiving situation arise in which
you need to change to a different receiving mode, just press
the
key. The receiving modes available are:
AUTO
AUTO
AUTO
AUTO
AUTO
: The receive mode is automatically set accord-
ing to the default values for the selected fre-
quency range
NFM
NFM
NFM
NFM
NFM
: Narrow-bandwidth FM (used for voice communication)
WFM
WFM
WFM
WFM
WFM
: Wide-bandwidth FM (used for high-fidelity broadcasting)
AM
AM
AM
AM
AM
:
Amplitude Modulation
1) The “WFM” mode cannot be selected on the “A-Band”.
2) Unless you have a compelling reason to do so, leave the Automatic Mode
Selection feature on in order to save time and trouble when changing bands.
If you make a mode change for a particular frequency or station, you can always store
that one channel into memory, as the mode setting will be memorized along with the
frequency information.
A
DVANCED
O
PERATION
Summary of Contents for VX-8R
Page 61: ...VX 8R OPERATING MANUAL 59 NOTE ...
Page 77: ...VX 8R OPERATING MANUAL 75 NOTE ...
