VX-8R O
PERATING
M
ANUAL
48
M
EMORY
M
ODE
(
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
)
M
EMORY
S
TORAGE
S
TORING
I
NDEPENDENT
T
RANSMIT
F
REQUENCIES
(
“O
DD
S
PLITS
”
)
All memories can store an independent transmit frequency, for operation on repeaters
with non-standard shift. To do this:
1. Store the receive frequency using the method already described under
M
EMORY
S
TOR
-
AGE
(it doesn’t matter if a repeater offset is active).
2. Tune to the desired transmit frequency, then press and hold in the
key for 1/2
second.
3. Within five seconds of releasing the
key, rotate the
DIAL
knob to select the same
memory channel number as used in step “1” above.
4. Press and hold in the
PTT
switch, then briefly press the
key once more while
holding the
PTT
switch in (this does not key the transmitter).
Whenever you recall a memory, which contains in-
dependently-stored transmit and receive frequen-
cies, the “
” indication will appear in the display.
M
EMORY
R
ECALL
1. While operating in the VFO mode, press the
key to
enter the Memory mode.
2. Rotate the
DIAL
knob to select the desired channel.
3. If you press the
key briefly, then rotate the
DIAL
knob,
the memory channel will be selected in 10 channels per step.
4. To return to the VFO mode, press the
key.
1) When the radio is already set to the Memory mode, an easy way to recall
memories is to key in the memory channel number, then press the
key.
For example, to recall memory channel #14, press
Æ
Æ
.
2) You may change the step of the fast channel selection mode
(
key + DIAL knob
)
via Set Mode Item 52: MEMORY FAST STEP. See page 150 for details.
Summary of Contents for VX-8R
Page 61: ...VX 8R OPERATING MANUAL 59 NOTE ...
Page 77: ...VX 8R OPERATING MANUAL 75 NOTE ...
