VXA-100 A
VIATOR
P
ILOT
O
PERATING
M
ANUAL
31
F
IELD
P
ROGRAMMING
M
ODE
Memory Storage into the BOOK Memory
r
Press and hold the
PTT
and
LAMP
switch while
turning the radio on, to activate the Field Pro-
gramming Mode.
r
Select the desired frequency to be stored in the
BOOK Memory.
r
Press and hold the [
MW(SPL.W)
] key for ½ sec-
ond. The display will indicate “
BOOK;
” and a
channel number will blink on the LCD.
r
Wi t h i n f i v e s e c o n d s o f p r e s s i n g t h e
[
MW(SPL.W)
] key, rotate the
CHANNEL
se-
lector knob to select the desired memory chan-
nel number for storage.
r
Now press and hold in the [
MW(SPL.W)
] key
for ½ second; you will now see “
))))))))
”
on the LCD. To attach an alpha/numeric name
(label) to the memory, proceed to the next step;
otherwise press and hold the [
MW(SPL.W)
] key
for ½ second to save the entry and exit.
r
To label a memory with an alpha/numeric name,
the next step is to use the
CHANNEL
selector
knob to select any of the 48 available characters
(including letters, numbers, and special symbols).
When the desired first character appears, press
down on the
VOLUME
knob momentarily to
move on to the next character.
r
Select succeeding characters in the same man-
ner, pressing down on the
VOLUME
knob mo-
mentarily after each selection.
r
After entering the entire name (eight characters
maximum), press the [
MW(SPL.W)
] key for ½
second to save all data for the channel.
