28
While operating the portable node, the following functions may be set on the portable node FT5D transceiver.
Function
Key or Dial
Return to the transceiver setting screen
Press and hold the
GM/X
key
Displays the Function menu Screen*
Press the
F
menu
key
Enters the BACKTRACK screen
Touch [
DISP
] on the Function Menu Screen
Enters the Set mode*
Press and hold the
F
menu
key
Displays the frequency display screen
Press the V/M key
Displays the Function menu Screen*
Press the
F
menu
key
Selects the Transmission Power Level
Touch [
TXPWR
] in the Function Menu Screen
Selects Speaker Mute
Press the
A/B
key
Disconnects a node or a room on the Internet
Press and hold the
BAND
key
Squelch OFF
While
MONI
key is pressed
Adjusts the squelch level
Press the SQL key, then rotate the VOL knob
* Some items in the Set mode and Function menu are automatically set for the Portable Digital Node function, so the
settings cannot be used
Setting the speaker mute
You can mute the audio output of the speaker of the node station FT5D transceiver.
You cannot set it in Direct Operation.
Press [
A/B
] key each time toggles the mute mode as follows.
MUTE OFF
MUTE ALL
MUTE TX
MUTE RX
MUTE OFF
・・・
MUTE OFF
: Disable mute.
MUTE ALL
: Mute both the received voice from the C4FM digital station and the voice from the node station on the
Internet.
MUTE RX
:
Mute the received voice from the C4FM digital station.
MUTE TX
:
Mute the voice from the node station on the Internet.
When the MUTE setting is enabled, the mute icon “ ” blinks at the top of the LCD.
When the frequency setting screen is displayed, the mute setting status is displayed for about 1 second on the screen
each time you press the [
A/B
] key.
